LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1998 >> Avalon XLS >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul - V6 & V8 >> Engine Sensors & Switches >> Park/Neutral Position (PNP) Switch >> Removal (Land Cruiser & LX470)

Removal (Land Cruiser & LX470)

  1. The PNP switch is located on passenger's side of transmission. See Figure. Remove necessary components for access to PNP switch.
  2. Disconnect electrical connector at PNP switch. Disconnect shift linkage from control lever on transmission for access to PNP switch.
  3. Remove nut and control lever from transmission. Bend tabs upward on lock plate, away from PNP switch retaining nut. Remove PNP switch retaining nut, lock plate, PNP switch retaining bolt and PNP switch.