LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1998 >> Avalon XLS >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul - V6 & V8 >> Engine Sensors & Switches >> Park/Neutral Position (PNP) Switch >> Removal (Avalon & Camry A/T & Sienna)

Removal (Avalon & Camry A/T & Sienna)

  1. The PNP switch is located on side of transaxle. See Figure. Remove necessary components for access to PNP switch.
  2. Disconnect electrical connector at PNP switch. Disconnect shift cable from control lever on transaxle for access to PNP switch.
  3. Remove nut, washer and control lever from transaxle. Bend tabs upward on lock plate, away from PNP switch retaining nut. Remove PNP switch retaining nut, lock plate, PNP switch retaining bolts and PNP switch.
scientia non olet · About LEMON Manuals