LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1998 >> Avalon XLS >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul - V6 & V8 >> Engine Sensors & Switches >> Airflow Meter >> Removal & Installation (Tacoma, T100 & 4Runner)

Removal & Installation (Tacoma, T100 & 4Runner)

  1. Disconnect electrical connector at airflow meter. Airflow meter is located between air intake hose and upper cap on air cleaner assembly.
  2. Remove air intake hoses as necessary. Remove retaining bolts and airflow meter. To install, reverse removal procedure. Tighten retaining bolts to specification. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals