LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1998 >> Avalon XLS >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul - V6 & V8 >> Engine Sensors & Switches >> Airflow Meter >> Removal & Installation (Sienna)

Removal & Installation (Sienna)

  1. Disconnect electrical connector from airflow meter. Airflow meter is bolted to the side of air cleaner hose, near air cleaner upper cap on air cleaner assembly. Disconnect EVAP hose at charcoal canister and PCV hose from valve cover.
  2. Disconnect clamps and remove air cleaner upper cap from air cleaner assembly. Loosen clamp and disconnect air cleaner hose from throttle body. Remove air cleaner upper cap with air cleaner hose. Remove bolts, airflow meter and gasket. To install, reverse removal procedure using NEW gasket.
scientia non olet · About LEMON Manuals