LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1998 >> Avalon XLS >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul - V6 & V8 >> Engine Sensors & Switches >> Airflow Meter >> Removal & Installation (Avalon & Camry)

Removal & Installation (Avalon & Camry)

  1. Disconnect electrical connector from airflow meter. Airflow meter is bolted to the side of air intake hose, near upper cap on air cleaner assembly.
  2. Remove bolts, airflow meter and gasket. To install, reverse removal procedure using NEW gasket.
scientia non olet · About LEMON Manuals