Removal & Installation (Land Cruiser, LX470, Tacoma, T100 & 4Runner)
EVAP VSV servicing procedure is just primarily an unbolt and bolt-on procedure. See EVAP VSV LOCATIONS table.
EVAP VSV LOCATIONS
| Application | Location |
|---|---|
| Land Cruiser & LX470 | Mounted On Driver's Side Center Of Intake Manifold Below Intake Manifold Cover On Top Of Engine & Contains Black 2-Pin Electrical Connector With Blue/Black & Black/Yellow Wires |
| Tacoma | On End Of Charcoal Canister & Contains Black 2-Pin Electrical Connector With White/Red & White/Green Wires |
| T100 | On Top Of Charcoal Canister & Contains Black 2-Pin Electrical Connector With White/Red & White/Green Wires |
| 4Runner | On End Of Charcoal Canister & Contains Black 2-Pin Electrical Connector With White/Blue & White/Green Wires |