LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1998 >> Avalon XLS >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul - V6 & V8 >> Emission Systems & Sub-Systems >> EVAP Vacuum Switching Valve (VSV) >> Removal & Installation (Avalon, Camry & Sienna)

Removal & Installation (Avalon, Camry & Sienna)

  1. Remove "V" bank cover. See Figure-50. The EVAP VSV is the front inside VSV on emission control valve set. See Figure-50.
  2. Disconnect electrical connectors and vacuum lines from vacuum switching valves on emission control valve set. Remove emission control valve set.
  3. Remove EVAP VSV from emission control valve set. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals