Drive Belt Adjustments& Tension Specifications: CELICA
NOTE:
Drive belt tension is measured using Borroughs BT-33-73F or DENSO BTG-20 belt tension gauge. See Figure.
BELT TENSION - CELICA
| Application | Lbs. | ||
|---|---|---|---|
| Alternator | |||
| WIth A/C | |||
| New | 170-180 | ||
| Used | 95-135 | ||
| Without A/C | |||
| New | 100-150 | ||
| Used | 75-115 | ||
| A/C Compressor | |||
| New | 170-180 | ||
| Used | 88-132 | ||
| Power Steering | |||
| New | 99-121 | ||
| Used | 44-77 | ||