LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1998 >> Avalon XLS >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Instrument Panel >> Removal & Installation >> Instrument Cluster >> Removal & Installation (Supra)

Removal & Installation (Supra)

  1. Disable air bag system, remove driver's air bag and steering wheel. See AIR BAG RESTRAINT SYSTEMS article. Remove steering column covers. Remove hood release lever and retaining screw covers from instrument panel lower finish panel. Remove 2 bolts and 2 retaining screws to remove instrument panel lower finish panel and panel pad behind finish panel. See Figure.
  2. Remove 5 screws retaining instrument cluster finish panel and remove panel. Pry center cluster finish panel and left and right cluster finish panels from instrument panel. Pull instrument cluster out far enough to disconnect harness connectors. Remove instrument cluster. To install, reverse removal procedure. Before installing steering wheel, center spiral cable.