Installation (4Runner)

NOTE: To ensure proper operation of sun roof, ensure drive cable is in closed position and sun roof drive motor marks are aligned.

If sun roof housing was disassembled, adjust drive cable to a fully closed and tilted down position. Slide cable forward or backwards to align marks. See Fig 3. Prior to installing drive motor, remove cam plate cover from drive motor. See Fig 4. Turn drive gear until marks align, indicating a full closed position. Reinstall cam plate cover. To complete installation, reverse removal procedure.

Fig 1: Removing Headliner (4Runner)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 2: Exploded View Of Sun Roof Assembly (4Runner)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 3: Aligning Drive Cable (4Runner)

Fig 4: Aligning Sun Roof Drive Gear (4Runner)