LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1997 >> Land Cruiser >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Component Testing >> Oil Pressure Gauge & Sender Tests >> Oil Pressure Gauge & Harness Operational Test

Oil Pressure Gauge & Harness Operational Test

  1. Unplug oil sending unit connector on engine. Turn ignition switch to ON position. Oil gauge should indicate LOW. Turn ignition switch to OFF position. Connect a 12-volt, 3.4-watt test light between oil sending unit harness connector terminal and ground.
  2. Turn ignition switch to ON position. Test light should glow and oil pressure gauge should slowly move to HIGH. If gauge functions as specified, perform SENDING UNIT OPERATIONAL TEST below. If gauge does not function as specified, perform OIL PRESSURE GAUGE RESISTANCE TEST below.
scientia non olet · About LEMON Manuals