LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1997 >> Avalon XLS >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension - Rear >> Removal & Installation >> Suspension Arms >> Installation

Suspension Arms: Installation

  1. To install, reverse removal procedure. Take care to install components at original locations.
    NOTE: On Camry, right and left suspension arms are marked with a paint mark. Install arms so paint mark faces rear of vehicle.
  2. Temporarily install all bolts, leaving them loose. Install wheels. Lower vehicle. Bounce vehicle several times to stabilize suspension.
  3. Align reference marks on cam plate, No. 2 (rear) suspension arm, and body. Tighten bolts to specification with vehicle weight on suspension. See TORQUE SPECIFICATIONS . Check rear wheel alignment. See WHEEL ALIGNMENT SPECIFICATIONS & PROCEDURES article in WHEEL ALIGNMENT section.
scientia non olet · About LEMON Manuals