Post-Collision Air Bag Safety Inspection
WARNING: This page is about a different car, the 1995 Toyota Tercel. However, it is still accessible from the selected car via links, so may be relevant.
POST-COLLISION AIR BAG SAFETY INSPECTION
| Action | Components |
| Replace After Deployment | Air Bag Module(s), Center Air Bag Sensor Assembly |
| Inspect & If Damaged, Replace Component (Even If Air Bag Did Not Deploy) | Center Console Bracket Support, Instrument Panel, Spiral Cable, Steering Wheel, Wiring Harness & Connectors |
| Comments | If any components are damaged or bent, they must be replaced. Wiring for Front Air Bag Sensors can be repaired following manufacturer's instructions. |