A-245E & A-246E
TRANSMISSION SPECIFICATIONS (A-245E & A-246E)
| Application | In. (mm) | |
|---|---|---|
| Assembly Height (Underdrive Clutch) | .681-.717 (17.29-18.21) | |
| Bushing Inside Diameter | ||
| Direct Clutch | 1.900 (48.27) | |
| Oil Pump Body | 1.503 (38.18) | |
| Planetary Sun Gear | ||
| Standard | 1.173-1.174 (29.80-29.83) | |
| Maximum | 1.176 (29.87) | |
| Ring Gear Flange | .749-.750 (19.03-19.05) | |
| Stator Shaft | ||
| Front | .849 (21.57) | |
| Rear | 1.066 (27.07) | |
| Sun Gear Flange | .867-.868 (22.03-22.05) | |
| Underdrive Clutch (Front) | ||
| Standard | 1.831-1.832 (46.50-46.53) | |
| Maximum | 1.833 (45.57) | |
| Underdrive Clutch (Rear) | ||
| Standard | 2.165-2.167 (55.00-55.03) | |
| Maximum | 2.169 (55.08) | |
| Countershaft End Play | .009-.035 (.23-.89) | |
| Countershaft Height | 1.193-1.280 (30.30-32.50) | |
| 1st & Reverse Clutch Pack Clearance | .095-.125 (2.42-3.18) | |
| Input Shaft End Play | .012-.035 (.30-.90) | |
| Piston Stroke | ||
| Direct Clutch | .044-.060 (1.12-1.52) | |
| Forward Clutch | .056-.071 (1.41-1.81) | |
| Underdrive Clutch | .059-.075 (1.50-1.90) | |
| 2nd Coast Brake | .059-.118 (1.50-3.00) | |
| Planetary Pinion Gear | ||
| Thrust Clearance | .008-.020 (.20-.50) | |
| Side Gear Backlash | .002-.008 (.05-.20) | |