A-242L, A-241E & A-244E
TRANSMISSION SPECIFICATIONS (A-242L, A-241E & A-244E)
| Application | In. (mm) | ||
|---|---|---|---|
| Assembly Height (Underdrive Clutch) | .681-.717 (17.29-18.21) | ||
| Bushing Inside Diameter | |||
| Direct Clutch | 1.853 (47.07) | ||
| Oil Pump Body | 1.503 (38.18) | ||
| Planetary Sun Gear | |||
| Standard | 1.173-1.174 (29.80-29.83) | ||
| Maximum | 1.176 (29.87) | ||
| Ring Gear Flange | .749-.750 (19.03-19.05) | ||
| Stator Shaft | |||
| Front | .849 (21.57) | ||
| Rear | 1.066 (27.07) | ||
| Sun Gear Flange | .867-.868 (22.03-22.05) | ||
| Underdrive Clutch (Front) | |||
| Standard | 1.831-1.832 (46.50-46.53) | ||
| Maximum | 1.833 (45.57) | ||
| Underdrive Clutch (Rear) | |||
| Standard | 2.165-2.167 (55.00-55.03) | ||
| Maximum | 2.169 (55.08) | ||
| Countershaft End Play | .009-.035 (.23-.89) | ||
| Countershaft Height | 1.311-1.398 (33.30-35.50) | ||
| 1st & Reverse Clutch Pack Clearance | .080-.109 (2.04-2.76) | ||
| Input Shaft End Play | .012-.035 (.30-.90) | ||
| Piston Stroke | |||
| Direct Clutch | |||
| A-241E | .044-.058 (1.11-1.47) | ||
| A-242L & A-244E | .064-.078 (1.63-1.97) | ||
| Forward Clutch | |||
| A-244E | .044-.058 (1.11-1.47) | ||
| All Other Transaxles | .056-.071 (1.42-1.81) | ||
| Underdrive Clutch | |||
| A-242L & A-244E | .059-.073 (1.50-1.86) | ||
| A-241E | .048-.061 (1.21-1.55) | ||
| 2nd Coast Brake | .059-.118 (1.50-3.00) | ||
| Planetary Pinion Gear | |||
| Thrust Clearance | .008-.020 (.20-.50) | ||
| Side Gear Backlash | .002-.008 (.05-.20) | ||