LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1995 >> T100 Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Front Brake Rotor >> Removal & Installation (2WD)

Removal & Installation (2WD)

  1. Remove caliper. Remove grease cap, cotter pin, washer and castellated nut. Remove thrust washer and outer wheel bearing. Remove rotor and hub assembly.
  2. Place alignment marks on rotor and hub for reassembly reference. Remove retaining bolts, and separate hub from rotor. To complete installation, reverse removal procedure. Adjust wheel bearings. See SUSPENSION - FRONT - 2WD article. Tighten all bolts to specification. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals