LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1995 >> Paseo Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Overhaul - A-240 "E" & "L" Series >> Testing >> Road Test >> "2" Range Test

"2" Range Test

  1. Shift to "2" range. Drive with accelerator pedal held constantly at full throttle. Ensure 1-2 upshift points take place and are operating properly. See appropriate SHIFT SPEED SPECIFICATIONS .
    NOTE: In "2" range there will be no lock-up to 2nd gear.
  2. While driving in "2" range, 2nd gear, release accelerator pedal and check engine braking effect. If there is no engine braking effect, 2nd coast brake is faulty. Check for abnormal noise and shock at acceleration and deceleration.