LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1995 >> Land Cruiser >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Parking Brake Shoes (Internal) >> Removal (With Rear Disc Brakes)

Removal (With Rear Disc Brakes)

  1. Remove rotor. See REAR BRAKE ROTOR . Remove tension spring, shoe return springs and shoe strut with spring.
  2. Pull out on front shoe and remove adjusting screw set. Remove hold-down spring, front shoe and tension spring. Remove rear shoe, and disconnect parking brake cable from lever. See Fig 1.
Fig 1: Exploded View Of Internal Parking Brake Assembly (Typical)
G92I01683Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002