Disc Rotor: Remove & Replace
WARNING: This page is about the Supra 2JZ-GE, Automatic, which is a different variant/trim than selected.
Includes: Repack Wheel Bearings (where applicable) and replace Pads (if necessary).
DOES NOT include refinishing.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Front,Both,Inboard Mounted | Includes: Repack Wheel Bearings. | 1.8 | B | |
| Front,Both,Outboard Mounted | 1.0 | B | ||
| Front,One Side,Inboard Mounted | Includes: Repack Wheel Bearings. | 1.0 | B | |
| Front,One Side,Outboard Mounted | 0.6 | B | ||
| Rear,Both | 1.0 | B | ||
| Rear,One Side | 0.6 | B | ||
| Combination Procedure: DISC ROTOR: Burnish Brake Rotors While Driving Vehicle: | ||||
| 0.5 | B | |||
| Combination Procedure: DISC ROTOR (REMOVED): Refinish: DOES NOT include grind hot spots. | ||||
| Each Additional | 0.3 | B | ||
| One | 0.5 | B | ||