LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1994 >> Paseo Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Front Brake Rotor >> Removal & Installation

Removal & Installation

  1. Remove caliper assembly with brakeline connected, and wire aside. See FRONT BRAKE CALIPER under REMOVAL & INSTALLATION. Remove torque plate from knuckle.
  2. Mark rotor and hub for installation reference. Slide rotor off hub assembly. To install, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS table at the end of this article.
scientia non olet · About LEMON Manuals