LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1993 >> Paseo Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Overhaul - A-241E/H/L & A-243E) >> Testing >> Road Test >> "2" Range Test

"2" Range Test

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 1994 Toyota MR2, 1993 Toyota MR2, 1993 Toyota Celica, 1992 Toyota MR2, and 1992 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. Shift to "2" range. While driving with the accelerator pedal held constantly at full throttle valve opening position, push in one of the pattern selectors. Ensure that 1-2 upshift takes place and shift point conforms to correct specifications. Refer to appropriate table under SHIFT SPEED SPECIFICATIONS .
  2. While driving in "2" range, 2nd gear, release accelerator pedal and check engine braking effect. If there is no engine braking effect, 2nd coast brake is faulty.
  3. Check for abnormal noise and shock at acceleration and deceleration.
scientia non olet · About LEMON Manuals