One-Way Clutch Testing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 1994 Toyota MR2, 1993 Toyota MR2, 1993 Toyota Celica, 1992 Toyota MR2, and 1992 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
- Insert a turning tool into inner race of one-way clutch. Install Tester (09351-32010) so that it fits in notch of converter hub and outer race of one-way clutch. See Fig 1.
- With converter in normal operating position, clutch should lock-up when turned counterclockwise, and should rotate freely and smoothly when turned clockwise. If necessary, clean converter. Retest clutch. If clutch fails test, replace converter.