LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1993 >> Paseo Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Overhaul - A-241E/H/L & A-243E) >> Component Disassembly & Reassembly >> Rear Planetary Gear >> Reassembly

Rear Planetary Gear: Reassembly

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 1994 Toyota MR2, 1993 Toyota MR2, 1993 Toyota Celica, 1992 Toyota MR2, and 1992 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install No. 2 one-way clutch into outer race. Face No. 2 one-way clutch flanged side toward outer race shiny side. Install retainers and snap rings to both sides of No. 2 one-way clutch.
  2. Install planetary gear into No. 2 one-way clutch facing inner race of planetary gear inward from Black side of outer race. Check operation of No. 2 one-way clutch. Coat thrust washers with petroleum jelly. Install thrust washer on both sides of carrier. Align tab of washers with hollow of carrier.
scientia non olet · About LEMON Manuals