LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1993 >> Paseo Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Overhaul - A-241E/H/L & A-243E) >> Component Disassembly & Reassembly >> Oil Pump >> Disassembly

Oil Pump: Disassembly

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 1994 Toyota MR2, 1993 Toyota MR2, 1993 Toyota Celica, 1992 Toyota MR2, and 1992 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove "O" rings and 2 oil seal rings from pump body and stator shaft. Remove race from stator shaft. Remove clutch drum thrust washer from stator shaft.
  2. Remove 11 bolts attaching oil pump body and stator shaft. Identify top and bottom and keep parts in order. Separate stator shaft and pump body. Mark gear location for reassembly reference. See Figure. Using screwdriver, remove front seal.
scientia non olet · About LEMON Manuals