LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1993 >> Paseo Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Overhaul - A-241E/H/L & A-243E) >> Component Disassembly & Reassembly >> Front Planetary Gear >> Inspection

Front Planetary Gear: Inspection

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 1994 Toyota MR2, 1993 Toyota MR2, 1993 Toyota Celica, 1992 Toyota MR2, and 1992 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure inside diameter of sun gear. Maximum inside diameter for A-241H is .8699" (22.096 mm). If inside diameter exceeds specification, replace sun gear.
  2. Measure planetary pinion gear thrust clearance. Standard clearance is .0063-.0220" (.160-.560 mm). See Fig 3. Maximum clearance is .024" (.61 mm). If clearance exceeds specification, replace planetary gear assembly.
Fig 1: Checking One-Way Clutch Operation
G93F25754Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 2: Exploded View Of Front Planetary Gear
G93G25755Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 3: Measuring Planetary Pinion Gear Thrust Clearance
G93H25756Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals