Forward Clutch: Inspection

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 1994 Toyota MR2, 1993 Toyota MR2, 1993 Toyota Celica, 1992 Toyota MR2, and 1992 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.

Inspect clutch piston. Shake piston to ensure check ball is free. Ensure valve does not leak by applying low pressure air. Replace oil seal rings. DO NOT spread ring ends more than required for installation. Inspect discs, plates and flanges.

Fig 1: Checking Forward Clutch Piston Stroke

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 2: Exploded View Of Forward Clutch (A-540H Shown; A-241H Similar)

NOTE: Before assembling new pistons, soak them in ATF for at least 15 minutes.