Control Valve Assembly: Notes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 1994 Toyota MR2, 1993 Toyota MR2, 1993 Toyota Celica, 1992 Toyota MR2, and 1992 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Count number of adjusting rings before disassembly of control valve assembly. Throttle pressure is changed according to number of rings. Some valve bodies DO NOT have adjusting rings. Note which step at end of plunger sleeves is in contact with valve body before disassembly. Line pressure is affected by plunger location. When disassembling control valve assembly, DO NOT damage or deform plate that overhangs valve body.