LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1993 >> Paseo Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Overhaul - A-241E/H/L & A-243E) >> Component Disassembly & Reassembly >> 2ND Coast Brake >> Disassembly

2ND Coast Brake: Disassembly

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 1994 Toyota MR2, 1993 Toyota MR2, 1993 Toyota Celica, 1992 Toyota MR2, and 1992 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.

Remove oil seal ring from piston. Remove piston rod "E" ring while pushing piston with needle-nose pliers. Remove inner spring, plate washer and piston rod. See Figure.

scientia non olet · About LEMON Manuals