LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1993 >> Paseo Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Overhaul - A-241E/H/L & A-243E) >> Component Disassembly & Reassembly >> 2ND Brake >> Disassembly & Inspection

Disassembly & Inspection

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 1994 Toyota MR2, 1993 Toyota MR2, 1993 Toyota Celica, 1992 Toyota MR2, and 1992 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.

Apply compressed air to oil hole to remove piston. Remove 2 "O" rings from piston. Inspect discs, plates and flange. See Figure.