Transmission Specifications
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 1992 Geo Prizm, 1991 Toyota MR2, 1991 Toyota Corolla, 1991 Geo Prizm, and 1990 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
TRANSMISSION SPECIFICATIONS
| Application | In. (mm) | |
|---|---|---|
| Countershaft End Play | .009-.035 (.23-.89) | |
| Countershaft Height | 1.311-1.398 (33.30-35.50) | |
| Bushing Inside Diameter | ||
| Direct Clutch | 1.853 (47.07) | |
| Oil Pump Body | 1.503 (38.18) | |
| Ring Gear Flange | .749-.750 (19.03-19.05) | |
| Stator Shaft | ||
| Front | .849 (21.57) | |
| Rear | 1.066 (27.07) | |
| Sun Gear Flange | .867-.868 (22.03-22.05) | |
| Underdrive Clutch (Front) - Standard | 1.831-1.832 (46.50-46.55) | |
| Underdrive Clutch (Front) - Maximum | 1.833 (45.57) | |
| Underdrive Clutch (Rear) - Standard | 2.165-2.167 (55.00-55.03) | |
| Underdrive Clutch (Rear) - Maximum | 2.169 (55.08) | |
| Input Shaft End Play | .012-.035 (.30-.90) | |
| Piston Stroke | ||
| Direct Clutch - A-240E | .045-.059 (1.13-1.50) | |
| Direct Clutch - A-240L | .054-.067 (1.37-1.70) | |
| Direct Clutch - A-241L & A-241E | .044-.058 (1.11-1.47) | |
| Direct Clutch - A-243L & A-244E | .064-.078 (1.63-1.97) | |
| Forward Clutch - A-244E | .044-.058 (1.11-1.47) | |
| Forward Clutch - All Other Transaxles | 056-.071 (1.42-1.81) | |
| Underdrive Clutch - A-240E & A-241L | .058-.074 (1.47-1.89) | |
| Underdrive Clutch - A-240L, A-243L & A-244E | .059-.073 (1.50-1.86) | |
| Underdrive Clutch - A-241E | .048-.061 (1.21-1.55) | |
| 2nd Coast Brake | .059-.118 (1.50-3.00) | |
| Planetary Pinion Gear Thrust Clearance | .008-.020 (.20-.50) | |
| Side Gear Backlash | .002-.008 (.05-.20) | |