LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1993 >> Paseo Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Overhaul - A-240E/L, A-244L & A-245E) >> Torque Converter >> One-Way Clutch Test

One-Way Clutch Test

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 1992 Geo Prizm, 1991 Toyota MR2, 1991 Toyota Corolla, 1991 Geo Prizm, and 1990 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install turner and stopper of One-Way Clutch Tester (09350-30020) in torque converter. See Fig 1. Turner fits in inner race of one-way clutch. Stopper fits in notch of converter hub and outer race of one-way clutch.
  2. Clutch should lock when rotated counterclockwise, and turn freely when rotated clockwise. If necessary, clean converter and retest clutch. Replace converter if clutch does not test as described.
Fig 1: Checking Torque Converter One-Way Clutch
G93I23810Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals