LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1993 >> Paseo Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Overhaul - A-240E/L, A-244L & A-245E) >> Performance Tests >> Road Test >> "L" Position Test

"L" Position Test

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 1992 Geo Prizm, 1991 Toyota MR2, 1991 Toyota Corolla, 1991 Geo Prizm, and 1990 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. While driving vehicle in "L" position, ensure there is no upshift to 2nd gear. Release accelerator pedal. If there is no engine braking effect, 1st and reverse brake is defective. Check for abnormal noise at acceleration and deceleration.
  2. On A-240E models, operate vehicle above 50 MPH in "D" or "2" position. Release accelerator pedal and shift into "L" position. Ensure that 2nd-1st gear down-shift occurs at 31-32 MPH. To prevent overrun, transaxle upshifts into 2nd gear at 33-37 MPH.
scientia non olet · About LEMON Manuals