LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1993 >> Paseo Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Overhaul - A-240E/L, A-244L & A-245E) >> On-Vehicle Service >> Speed Sensor & Rotor (A-240E, A-241E & A-244E) >> Removal & Installation

Removal & Installation

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 1992 Geo Prizm, 1991 Toyota MR2, 1991 Toyota Corolla, 1991 Geo Prizm, and 1990 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.

Remove retaining plate and pull out speed sensor. Remove "O" ring from speed sensor. Remove 2 bolts and sensor cover bracket. Using a screwdriver, remove sensor cover. DO NOT  damage cover. Remove sensor rotor. To install, reverse removal procedure. Tighten bolts to 48 INCH lbs. (5.4 N.m).

scientia non olet · About LEMON Manuals