LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1993 >> Paseo Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Overhaul - A-240E/L, A-244L & A-245E) >> On-Vehicle Service >> Governor Assembly (A-240L, A-241L & A-243L) >> Removal & Installation

Removal & Installation

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 1992 Geo Prizm, 1991 Toyota MR2, 1991 Toyota Corolla, 1991 Geo Prizm, and 1990 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect speedometer cable. Remove governor cover bolts. Using a screwdriver, remove governor cover. Remove "O" ring from cover. Remove governor body with thrust washer. Remove governor body adapter. Remove governor oil strainer. To install, reverse removal procedure. Install NEW gasket and tighten bolts to 115 INCH lbs. (13 N.m).

scientia non olet · About LEMON Manuals