LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1993 >> Paseo Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Overhaul - A-240E/L, A-244L & A-245E) >> Component Disassembly & Reassembly >> Oil Pump >> Disassembly

Oil Pump: Disassembly

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 1992 Geo Prizm, 1991 Toyota MR2, 1991 Toyota Corolla, 1991 Geo Prizm, and 1990 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove race from stator shaft. Remove "O" ring and oil seal rings from oil pump body and stator shaft. Remove clutch drum thrust washer from stator shaft.
  2. Mark stator shaft and oil pump body for reassembly reference. Remove stator shaft bolts. Separate stator shaft and oil pump body. Mark gear location for reassembly reference. Remove pump gears. Using screwdriver, remove front seal. See Figure.
scientia non olet · About LEMON Manuals