Disassembly & Reassembly
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 1992 Geo Prizm, 1991 Toyota MR2, 1991 Toyota Corolla, 1991 Geo Prizm, and 1990 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
Using Puller (09555-55010), press intermediate shaft bearings from shaft. Install intermediate shaft bearings using proper puller and Adapter (09351-32013) and press. Ensure gear flange end to intermediate shaft end measurement is 4.560" (115.82 mm). See Fig 1.