LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1993 >> Paseo Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Overhaul - A-240E/L, A-244L & A-245E) >> Component Disassembly & Reassembly >> Front Planetary Gear >> Disassembly

Front Planetary Gear: Disassembly

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 1992 Geo Prizm, 1991 Toyota MR2, 1991 Toyota Corolla, 1991 Geo Prizm, and 1990 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check No. 1 one-way clutch operation. Hold sun gear and turn hub. Hub should rotate freely clockwise and lock when turned counterclockwise. See Figure. Remove 2nd brake hub and No. 1 one-way clutch from sun gear.
  2. Remove thrust washer from sun gear input drum. Remove snap ring. Remove sun gear input drum. Remove shaft snap ring from sun gear. Remove one-way clutch retainer if clutch requires replacement. Remove one-way clutch from hub. See Figure.
scientia non olet · About LEMON Manuals