Disassembly & Reassembly

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 1992 Geo Prizm, 1991 Toyota MR2, 1991 Toyota Corolla, 1991 Geo Prizm, and 1990 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.

Apply compressed air to oil passage and remove 2nd brake piston. See Figure. Remove "O" rings from piston. Coat NEW "O" rings with ATF and install. Carefully press 2nd brake piston into 2nd brake drum. See Fig 1.

Fig 1: Exploded View Of 2nd Brake Piston