LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1993 >> Paseo Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Overhaul - A-240E/L, A-244L & A-245E) >> Component Disassembly & Reassembly >> 1ST & Reverse Brake Piston >> Disassembly

1ST & Reverse Brake Piston: Disassembly

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 1992 Geo Prizm, 1991 Toyota MR2, 1991 Toyota Corolla, 1991 Geo Prizm, and 1990 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using Spring Compressor (09350-32013), compress springs by tightening bolt gradually. Remove spring retainer snap ring and compressor.
  2. Remove piston return spring assembly. Apply compressed air to oil passage in transaxle case to remove piston. See Figure. Remove piston "O" rings.
scientia non olet · About LEMON Manuals