LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1993 >> Corolla Base, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.6L 4-CYL - VIN [A] & 1.8L 4-CYL - VIN [E] >> Engine Oiling >> Oil Pump >> Removal & Disassembly

Removal & Disassembly

  1. Remove timing belt and crankshaft sprocket. See TIMING BELT  under REMOVAL & INSTALLATION. Remove front exhaust pipe. Remove engine stiffener bracket (if equipped) and oil pan. See OIL PAN  under REMOVAL & INSTALLATION.
  2. Remove oil pump pickup. Remove dipstick from oil pump housing. Remove oil pump retaining bolts, and remove oil pump. Remove oil pump cover from rear of oil pump. Remove oil seal from oil pump housing. Remove snap ring, spring and relief valve from oil pump housing.
scientia non olet · About LEMON Manuals