LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1992 >> Tercel LE, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Standard >> Removal & Installation >> Hazard Warning Switch >> (Pickup & 4Runner)

(Pickup & 4Runner)

  1. Hazard warning switch is mounted to right of instrument cluster in instrument cluster finish panel. See Figure. Pull parking brake lever out. Remove instrument panel lower finish panel. See Figure.
  2. Remove knobs from heater control panel. Using flat-blade screwdriver and starting at right end of heater control panel, pry panel loose from 3 retaining clips. Disconnect clock connector.
  3. Remove 3 retaining screws from instrument cluster finish panel. Pry/pull cluster finish panel loose from 5 retaining clips. Disconnect wiring harness connectors.
  4. After instrument cluster finish panel has been removed, disconnect hazard switch connector and remove switch from panel. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals