LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1992 >> Tercel LE, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Standard >> Removal & Installation >> Hazard Warning Switch >> (Camry)

Hazard Warning Switch: (Camry)

  1. Hazard warning switch is mounted to back of heater control panel. See Figure. Remove steering column covers.
  2. Remove coin box and housing from instrument panel lower finish panel. See Figure. Remove screw covers, retaining screws and remove instrument panel lower finish panel. Center cluster finish panel is held in position by retaining clips. Pry center cluster finish panel away from radio and disconnect lighter connector(s).
  3. Remove 4 retaining screws from instrument cluster finish panel. Instrument cluster finish panel is held in position by retaining clips. Carefully pry large one-piece instrument cluster finish panel away from dash. Disconnect electrical connectors and A/C-heater ducts.
  4. Remove 4 retaining screws and all knobs from heater control panel. Pull control panel outward and disconnect hazard warning switch connector. Remove switch from rear of heater control panel. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals