LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1992 >> Tercel DX, 2D Sedan, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Standard >> Removal & Installation >> Instrument Cluster >> (Pickup & 4Runner)

(Pickup & 4Runner)

  1. Disconnect negative battery cable. Remove steering wheel. See STEERING WHEEL . Remove steering column covers. Remove hood release lever.
  2. Pull parking brake lever out. Remove instrument panel lower finish panel. See Figure. Remove knobs from heater control panel. Using flat-blade screwdriver and starting at right end of heater control panel, pry panel loose from 3 retaining clips. Disconnect clock connector.
  3. Remove 3 retaining screws from instrument cluster finish panel. Pry/pull cluster finish panel loose from 5 retaining clips. Disconnect wiring harness connectors.
  4. Remove left air register retaining screws and pull register from dash. Remove instrument cluster retaining screws. Pull cluster outward enough to disconnect wiring harness connectors and speedometer cable. Remove instrument cluster. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals