LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1992 >> Previa DX, AWD, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Standard >> Removal & Installation >> Instrument Cluster >> Removal (Celica With Air Bag)

Removal (Celica With Air Bag)

  1. Turn ignition switch to LOCK position. Disconnect negative battery cable. Wait at least one minute before continuing. Ensure front wheels are in straight-ahead position. Remove steering wheel. See STEERING WHEEL .
  2. Remove steering column covers. Remove plastic screw covers from instrument panel lower finish panel and remove 6 retaining screws. See Figure. Remove 5 bolts securing inner pad of lower finish panel and remove inner pad.
  3. Pry off lower instrument cluster finish panel from around ignition key bezel and steering column. Remove 5 screws retaining instrument cluster finish panel. Pull cluster finish panel outward from heater controls and instrument cluster.
  4. Remove instrument cluster retaining screws. Pull instrument cluster out far enough to disconnect harness connectors and speedometer cable (if equipped). Remove instrument cluster.
scientia non olet · About LEMON Manuals