LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1992 >> Cressida >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension - Rear >> Removal & Installation >> Shock Absorber & Coil Spring >> Removal

Shock Absorber & Coil Spring: Removal

  1. Raise and support vehicle. Remove wheel. Using floor jack, support axle carrier. Disconnect strut rod-to-body bolt. Remove shock absorber-to-axle carrier mount nut. DO NOT remove bolt from axle carrier at this time.
  2. Remove rear seat and package tray trim. Remove shock absorber cap. If disassembling shock absorber and coil spring, loosen, but DO NOT remove shock absorber piston rod nut.
  3. Remove shock absorber-to-body nuts. Lower floor jack. Remove shock absorber-to-axle carrier bolt. Push axle carrier downward and remove shock absorber.
scientia non olet · About LEMON Manuals