Lower Suspension Arms & Strut Rod: Removal
- Raise and support vehicle. Remove wheels. Disconnect strut rod from axle carrier. Remove strut rod. Place reference marks on No. 1 lower suspension arm adjusting cams to indicate location for reassembly reference. Remove No. 1 adjusting cam, adjusting cam and bolt. See Figure.
- Remove axle carrier-to-No. 1 lower suspension arm. Remove nut and separate No. 1 suspension arm from axle carrier using Puller (SST 09628-10011). Disconnect stabilizer link from No. 2 lower suspension arm.
- Place reference marks on No. 2 lower suspension arm adjusting cams to indicate location for reassembly reference. Remove No. 2 adjusting cam, adjusting cam and bolt. Remove No. 2 lower suspension arm.