LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1992 >> Cressida >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.0L 6-CYL & 3.0L 6-CYL Turbo - VIN [M] >> Removal & Installation >> Oil Pan >> Installation (Cressida)

Installation (Cressida)

  1. Ensure sealing surfaces are clean. Apply a .20" (5.0 mm) diameter bead of sealant on inside of bolt/nut holes and at center of oil pan sealing surface between bolt/nut holes.
  2. Install oil pan, and tighten bolts/nuts to specification. See TORQUE SPECIFICATIONS TABLE - CRESSIDA . To install remaining components, reverse removal procedure. Tighten bolts/nuts to specification. See TORQUE SPECIFICATIONS TABLE - CRESSIDA. Fill crankcase with oil. Check front wheel alignment.
scientia non olet · About LEMON Manuals