LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1992 >> Cressida >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.0L 6-CYL & 3.0L 6-CYL Turbo - VIN [M] >> Removal & Installation >> Crankshaft Front Seal >> Removal & Installation (Timing Case Installed)

Removal & Installation (Timing Case Installed)

  1. Remove timing belt and crankshaft timing pulley. See TIMING BELT  under REMOVAL & INSTALLATION. Using Seal Puller (SST 09308-55010), remove seal from timing case.
  2. To install, apply grease to sealing lip of NEW seal. Using hammer, Driver (SST 09214-60010) and Seal Installer (SST 09506-35010), install seal. To install remaining components, reverse removal procedure.
scientia non olet · About LEMON Manuals