Oil Pump Drive Shaft Bearings: Inspection
Inspect oil pump drive shaft bearings for damage. Measure inside diameter of oil pump drive shaft bearings and oil pump drive shaft journal to determine oil clearance. Replace components if measurements are not within specification. See OIL PUMP DRIVE SHAFT BEARING SPECIFICATIONS table.
OIL PUMP DRIVE SHAFT BEARING SPECIFICATIONS
| Application | In. (mm) | |
|---|---|---|
| Bearing Inside Diameter | ||
| Front Bearing | 1.6142-1.6152 (41.000-41.026) | |
| Rear Bearing | 1.2992-1.3002 (33.000-33.025) | |
| Oil Clearance | ||
| Standard | .0010-.0026 (.025-.066) | |
| Wear Limit | .0031 (.079) | |