LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1991 >> Land Cruiser >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Removal & Installation >> Instrument Cluster >> (Cressida)

Instrument Cluster: (Cressida)

  1. Disconnect negative battery cable. Remove screw at lower portion of steering wheel pad. Remove steering wheel pad. Disconnect horn terminal.
  2. Remove steering wheel center pad set plate from clip of center pad. Install set plate to steering wheel with screw. Remove steering wheel nut. Remove steering wheel using steering wheel puller.
  3. Remove steering column covers. Remove trim panel under instrument cluster. Remove remote control mirror switch and satellite switch. Remove cluster finish panel. Disconnect wiring harness connectors.
  4. Remove instrument cluster retaining screws. Disconnect speedometer cable. Remove cluster retaining screws, and pull instrument cluster out. Disconnect wiring and remove instrument cluster. To install, reverse removal procedure. Tighten steering wheel nut to 25 ft. lbs. (35 N.m).
scientia non olet · About LEMON Manuals